Would this be too much?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55437
Printed Date: May 07, 2025 at 6:57 PM

Topic: Would this be too much?

Posted By: lucky259
Subject: Would this be too much?
Date Posted: May 09, 2005 at 5:12 PM

Right now I have 3 sirens on my alarm (Prestige 996a) I want to connect 1 more siren and I want to wire up strobes on the inside and outside. As of now the 2 additional sirens are splice into the siren that came with the alarm. I want to splice in and hook the strobes up to this same circuit. Even with the use of relays would this be too much stress on the alarm brain having all these things hooked up to the same output? It would be a total of 4 sirens and probablly 4-6 strobes.

Replies:

Posted By: OhioMike1101
Date Posted: May 09, 2005 at 5:18 PM

you need a relay. It would not be detrimental to the alarm at all with the use of a relay.

Posted By: lucky259
Date Posted: May 09, 2005 at 5:24 PM

bobk]G wrote:

back to your original post, Don't poen so many threads for the same thing. You got the answer in the 1st thread.

The previous post was just asking how to hook them up, this post is asking if it would be too much stress on the brain to hook them all up to the same wire (siren output)

Print Page | Close Window