dei warn away intagration

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55461
Printed Date: May 20, 2024 at 3:08 AM

Topic: dei warn away intagration

Posted By: J:UN
Subject: dei warn away intagration
Date Posted: May 09, 2005 at 11:22 PM

ok so I have a 791xv in my wrangler and cleaning out my shop today i found some old brand new in box clifford dual stage porox sensors. The ones with the neat little adjustable led displays. any ways I know in order for them to warn away I would need to add some relays and such to the dei siren or install another siren but I don't like the idea of me not knowing it warned away from my keychain. so with all that said has anyone came up with a way to duplicate the less than 0.8 sec pulses needed to activate the warn away yet? I've thought of using some sort of variable flasher but not sure if there even is such a thing. thanks

Replies:

Posted By: J:UN
Date Posted: May 10, 2005 at 8:53 AM

hmm to much for you guys? should i just find a more knowledgable forum?

Posted By: J:UN
Date Posted: May 10, 2005 at 7:10 PM

lol k

Posted By: Ravendarat
Date Posted: May 11, 2005 at 12:17 AM

Are you sure that the clifford shock sensor doesnt already generate a pulse of less than .8 secs already? If its dual stage than its quite possible that you can simply wire these sensors right into the blue multiplex wire of the car alarm as it sits.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Posted By: ccroadshop99031
Date Posted: May 11, 2005 at 3:47 PM

do you have the loop on the shock sensor side of the harness?

Posted By: ccroadshop99031
Date Posted: May 11, 2005 at 5:30 PM

sorry jus reread the post if u use the loose green wire it should work