Passlock I & II override

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55509
Printed Date: June 07, 2025 at 2:21 AM

Topic: Passlock I & II override

Posted By: nismo78
Subject: Passlock I & II override
Date Posted: May 10, 2005 at 11:14 PM

Today, I just installed the best thing ever, Scytek offers a Passlock I, II, and vats module that learns the resistance on these systems, all you have to do is give it 12v+ 12v- tap the yellow wire, and give it negative when running from the remote start, I can't remember the part number off-hand, but i'll get it from work and post it tomorrow.

Replies:

Posted By: Velocity Motors
Date Posted: May 11, 2005 at 12:26 AM

There are alot of modules out on the market that can do this as well, maybe not all in one module, but individual ones. Get the install manual on here as well, would like to see it.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: thepencil
Date Posted: May 11, 2005 at 9:35 AM

I would like to see this too...something better than two relays and a resistor and time. posted_image

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: Autoobsession
Date Posted: May 11, 2005 at 10:23 AM

DEI 555L Does all Passlock System Bypasses

-------------

Posted By: nismo78
Date Posted: May 14, 2005 at 11:52 PM

https://www.scytek.net/pdf/GMBypass.pdf

Print Page | Close Window