adding horn honk
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55545
Printed Date: May 15, 2025 at 11:30 AM
Topic: adding horn honk
Posted By: Atl_monte
Subject: adding horn honk
Date Posted: May 11, 2005 at 2:52 PM
I was wondering how do I go a bout making my horn sound when my alarm goes off..I didn't just wnata blarring horn I wanted it to honk, somebody said I would need a ligh flasher module and an extra relay I have picked up both.. my car is a 88 Monte Carlo
Replies:
Posted By: ccroadshop99031
Date Posted: May 11, 2005 at 3:44 PM
what kind of alarm?
Posted By: Atl_monte
Date Posted: May 11, 2005 at 5:20 PM
Viper 791XV
Posted By: ccroadshop99031
Date Posted: May 11, 2005 at 5:29 PM
i think that has a programable out put to be horn honk whitw w/ blue stripe i think id not het a relay hook 85 to dome supervison 86 to siren output 30 to ground and 87 to horn
Posted By: Atl_monte
Date Posted: May 11, 2005 at 5:47 PM
can somebody give me the link to the install instructions for the 791XV
Posted By: glamisguy99
Date Posted: May 11, 2005 at 7:29 PM
Posted By: Atl_monte
Date Posted: May 11, 2005 at 9:42 PM
thanks I needed to double check a few things the installer didn't do right...but can anyone still tell me how to add the horn honk feature?
Posted By: mo12v
Date Posted: May 11, 2005 at 9:49 PM
Some Alarm units allow you to hook a Direct Negative Pulse for Horn to factory Horn Wire............While some require you to use a Relay for a stronger Ground Pulse for the Horn
You Alarm Instructions should help.
Otherwise when in doubt use a Relay | OEM Horn | BLACK | (-) STEERING COLUMN HARNESS |
------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: ccroadshop99031
Date Posted: May 11, 2005 at 9:49 PM
once again get a relay hook 85 to dome supervison 86 to the + siren output 30 to ground and 87 to the horn
Posted By: auex
Date Posted: May 11, 2005 at 9:59 PM
I SUCK AT PAINT!!! ------------- Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: mo12v
Date Posted: May 11, 2005 at 10:02 PM
Looks good to me...... 'cept I would have used Glow In the Dark Paint
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: auex
Date Posted: May 11, 2005 at 10:03 PM
Quit lying.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: Atl_monte
Date Posted: May 13, 2005 at 7:31 PM
so one informed me that if I were to do the horn honk as showed in the diagram that my horn would sound everytime the alarm is set..I only want it to sound if the alram is bein triggered
Posted By: ccroadshop99031
Date Posted: May 13, 2005 at 9:17 PM
use the programible output
Posted By: Atl_monte
Date Posted: May 13, 2005 at 9:43 PM
what color and in which harness is the programmable output on a Viper 791XV?
|