2005 Ford F150 Transponder Bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55631
Printed Date: May 14, 2025 at 8:14 PM

Topic: 2005 Ford F150 Transponder Bypass

Posted By: Cqwester
Subject: 2005 Ford F150 Transponder Bypass
Date Posted: May 12, 2005 at 9:19 PM

Can someone tell me the correct way of installing a Bypass Transponder for a remote start. Im using a bulldog Model 791, I need to know Where the wire loop should be placed on the ignition cylinder to make it work properly. They say it should fit inside/ underneath the factory coil however the factory coil isnt a coil from what i see, it is a molded piece of plastic and screws into the column, and i cant move it out any farther. Am i missing something,, Do i need to pull the cylinder itself out? How is that done on the New Ford f150?

Thanks

Replies:

Posted By: mo12v
Date Posted: May 12, 2005 at 10:57 PM

Some pull the Factory Coil loose and put ring around Cylinder, then put Coil back on. Others wrap loop around Cylinder & Coil, placing it as far back on Cylinder as possible. Secure Loop with tape or a spot of RTV, but only do so AFTER U have tried Remote Start a few times. Some Loops have to be moved for "fine tuning"..............
OMEGA makes a Hard Wire Transponder that hooks into Factory wiring if that Loop doesn't work

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Print Page | Close Window