Print Page | Close Window

horn output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55635
Printed Date: May 14, 2025 at 2:05 PM


Topic: horn output

Posted By: rock1
Subject: horn output
Date Posted: May 12, 2005 at 11:25 PM

Im using the bulldog 62I and I have a negative horn output
Do I need a relay for this ? 92 mazda 929



Replies:

Posted By: desh187
Date Posted: May 13, 2005 at 12:02 AM
If it is negative output,just find GREEN/ red(-) wire in steering column harness which is horn wire on 92-929 and try it.If horn does not honk,then use a relay for stronger ground pulse.




Posted By: rock1
Date Posted: May 13, 2005 at 1:03 AM
The wire in the car is negative and the wire on the alarm is a negative.




Posted By: desh187
Date Posted: May 13, 2005 at 8:46 PM
Then go ahead and install it to the wire i have mentioned above





Print Page | Close Window