new alarm locking problem
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55799
Printed Date: May 10, 2025 at 12:10 AM
Topic: new alarm locking problem
Posted By: Markland556
Subject: new alarm locking problem
Date Posted: May 15, 2005 at 9:18 PM
Hello, im installing a new alarm in my 300E 86' and the only problem i cant fix is unlocking the doors. They lock fine with the remote. What i have done is taken the green wire from the passenger kick pannel and inturupted the signal that runs on it to control the locking. Here is the diagram i used to make it work.
But i have a problem on my alarm sheet it has 2 wires for lock/unlock. Here is how it shows up in my guide.
---Green (-) lock (+) unlock
---Blue (+) unlock (-) lock
Can anyone help me fix this. Im totally stumped, the only thing i can think of is that its not giving a ground signal to unlock, so i hooked up the blue wire to a relay to make it output a ground signal and it still doesnt unlock.
But i have a problem on my alarm sheet it has 2 wires for lock/unlock. Here is how it shows up in my guide.
---Green (-) lock (+) unlock
---Blue (+) unlock (-) lock
Can anyone help me fix this. Im totally stumped, the only thing i can think of is that its not giving a ground signal to unlock, so i hooked up the blue wire to a relay to make it output a ground signal and it still doesnt unlock.
Replies:
Posted By: Markland556
Date Posted: May 17, 2005 at 11:59 PM
Posted By: secureauto
Date Posted: May 18, 2005 at 11:10 PM