i am installing an alarm on a cargo trailer i have purchased a USAPRO AS16 made by Accele for the job i have not done an alarm before the (manuel)ha-ha shows how to plug every thing in but thats all
i am hooking up two dual stage shock sensors and dual sirens as well as a remote entry system i designed and built
the alarm has 1 hookup for the shock sensor the stock one has 4 wires but the other has an extra gray wire how do i hook this up
since i have no door pins i got 2 mag switches for the two doors also made by Accele they are white with white wires one longer then the other how do these connect
i am also useing 2 sirens how do i connect these there is one output for the siren that came with it
the alarm has an out put for the door lock actuators (2 wire) i have the relays for these do i use the diagram on this sight to connect them
this will all be running on its own battery
i took this on because i needed the system to design the linkage for the door locks
-------------
greenhorn
do it right or not at all
ok got most of this figured
two riddles
am hooking alarm to trailer have no door pins so have to use mag switches for door triggers have 2 accele switches all white 2 white wires 1 an inch longer than other are they pos or neg switches how to connect
2.want 2 use acc output to lock up elec brakes with relay how to connect
alarm is a USAPRO AS16
-------------
greenhorn
do it right or not at all