Valet remote start/entry, 2001 Toyota Camry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55828
Printed Date: May 09, 2025 at 11:21 PM

Topic: Valet remote start/entry, 2001 Toyota Camry

Posted By: darrelllh
Subject: Valet remote start/entry, 2001 Toyota Camry
Date Posted: May 16, 2005 at 1:09 PM

Good morning. I just got an old Valet remote start/keyless entry. I connected it to my 2001 Toyota Camry. The doors lock and unlock properly, but the remote start doesn't function. I have a 556U bypass module, but I am not sure which wire to connect the blue wire from the bypass to. Black is ground and red is 12V constant. The security module has a 12 connector plug but only the Red, Yellow, and white wires from it.

I also don't have a Valet switch to programme the module.

Anyone, please help.

Thank you Darrell Hoover

Replies:

Posted By: Autoobsession
Date Posted: May 16, 2005 at 10:20 PM

blue wire from the bypass goes to a neg output when the remote start is active. This is also known as an ign 3 - output on most remote starters.

-------------

Posted By: darrelllh
Date Posted: May 17, 2005 at 3:38 PM

Great Thank you. What type of switch can I use as a valet switch, toggle, rocker or just a push button and what connections on the remote.

Thanks