DEI 530T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5583
Printed Date: May 12, 2024 at 5:15 AM

Topic: DEI 530T

Posted By: S10Fan
Subject: DEI 530T
Date Posted: November 18, 2002 at 4:28 AM

Great Forum!

I hate for my first post to be a pain in the ***, but here goes……

I need an installation manual for a DEI 530T.

I plan to install the module in an S10 Pickup. I installed the power windows using GM regulators, motors, and switches. The switches are located in a center console so the actual wire running shouldn’t too troublesome. I’m mainly interested in “one touch” operation, and plan to use the trunk opening feature of my Code Alarm Elite 1100 to roll the windows down. Yes, I would prefer that the windows go up when I arm.

I searched this site for information and didn’t really see an answer to this question.

Thank you in advance for any help or information. I purchased the 530 from a former DEI dealer that no longer does mobile electronics, so there were no installers to talk to.

Thanks Again!

S10Fan

-------------
Clarion, Xtant, AudioControl, Focal

Replies:

Posted By: Velocity Motors
Date Posted: November 18, 2002 at 7:41 AM

https://www.the12volt.com/downloads/file.asp?ID=291

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: S10Fan
Date Posted: November 18, 2002 at 4:24 PM

Thank You!

-------------
Clarion, Xtant, AudioControl, Focal

Posted By: Velocity Motors
Date Posted: November 19, 2002 at 12:58 AM

No problemo

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: lowsaturncoupe
Date Posted: January 20, 2003 at 11:33 AM

Hello, can anyone help me with why I can't pull this manual up? Please can someone help. Thank you also would you happen to know the two wire hook up for a DEI mercury sensor?

Thank you,

derek