Print Page | Close Window

will alarm disarm if door lock popped?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55866
Printed Date: May 03, 2024 at 11:42 AM


Topic: will alarm disarm if door lock popped?

Posted By: harrisell1
Subject: will alarm disarm if door lock popped?
Date Posted: May 16, 2005 at 11:10 PM

Hello everyone, I have a question, if you get an aftermarket alarm/rs put on your vehicle (04 yukon denali), can it be disarm from the driver's door lock like it can with the factory.  What I mean is they are getting into the cars by popping the driver's lock and disarming the factory arm.  On this car you use the 456G to hook up the aftermarket alarm.  With that said can the aftermarket alarm be bypassed by popping that driver's door lock or does it actually see the door is open like you have door pins?  The aftermarket alarm is automate am7.  Thanks in advance!

electronics



-------------
electronics



Replies:

Posted By: oonikfraleyoo
Date Posted: May 16, 2005 at 11:23 PM
If you don't use the interface, you can definatly make it do it.

-------------
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.




Posted By: tcool
Date Posted: May 18, 2005 at 12:32 PM
Your aftermarket alarm will arm and disarm your factory alarm. Your factory alarm cannot arm or disarm your automate alarm. Therefore, if thieves are breaking into the door to disarm the factory alarm, it will not affect your aftermarket automate alarm- it will still go off.

-------------
bzzzzttttt




Posted By: harrisell1
Date Posted: May 18, 2005 at 10:17 PM

Thanks for the response oonikfraleyou, bob k, and tcool.  If I'm understanding this right, even if they would pop the driver's door lock the aftermarket alarm is still active and will sound when the door is open.  Even if you use the 456G interface?  I thought you would have to go directly to the door trigger wires in the bcm from the aftermarket alarm?  I'm just trying to make sure I'm understanding this right.  Thanks again!

 

Electronics  



-------------
electronics




Posted By: Uniqueauto
Date Posted: May 18, 2005 at 11:49 PM
Thats right, the aftermarket alarm will still sound regardless.

-------------
Installer/Owner

Double check twice Install once!
Wires are my Best Friends




Posted By: harrisell1
Date Posted: May 19, 2005 at 11:09 PM
Thank you very much on the info!

-------------
electronics





Print Page | Close Window