to get you up to speed, im installing a prestige aps786t with a 555l. basically i know where everything is goin alarm-wise, but need help with the r.s portion. to my assumption, this is how im seeing it as hooked up:
RED / white (+12 batt 1) (control circuit and ign&2 relays) -> red ign harness wire(1 of 2 to my understanding)
red (+12 batt 2) ( start and acc relays) -> red ign harness wire #2 (2 of 2 to my understanding)
yellow (starter) -> yellow in ign harness
blue (ign 1 output;only on in run and start) -> pink ign in ign harness
green (ign 2 output; only on in run <not start>) -> brown accy in ign harness
violet (accy output; only on in accy and run) -> orange accy in ign harness
and 555l connections:
r-code, blue, and black i understand, red would go to the red or RED / white above, but theres a pink which would go to the pink on ign harness, but whats the Pink/white wire next to red wire for? mine, in case i have a freak of nature, in order: red thick, pink/white thick, pink, violet (not used), blue/black, black, BLACK/ white, and the yellow and yellow/black wires.
if anyone can give me input i would very greatly appreciate it. i can try to elaborate if needed too. i have an understanding on how this stuff works, but wanna make absoutely positive im right b4 i kill my 5 year loan car. :errr: also tryin to get this done by wednesday.....
thanx again, chris
by the way, i was asking if the above was correct, not sayin how i did it.... just to set things straight....... any input greatly appreciated.... thanx