bypassing alarm, 1992 Nissan Pathfinder
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55911
Printed Date: May 09, 2025 at 3:57 PM
Topic: bypassing alarm, 1992 Nissan Pathfinder
Posted By: brwski
Subject: bypassing alarm, 1992 Nissan Pathfinder
Date Posted: May 17, 2005 at 2:56 PM
i need help - the vehicle i am trying to get into running order
(1992 Nissan Pathfinder SE) has been stored for several months. After removing/charging and reinstalling the battery - i cannot get it to start - the alarm seems to be overriding the ignition - all lights go on, windows open, doors lock and the car won't start. the only identifying marks i can find are on the relay under the hood next to the "siren/horn" device and it says
"PRO 9094C"
if anyone can identify this system from that information and tell me how i can bypass it (if possible) i would appreciate the information as i need to get this beast on the road.
thanks,
-------------
brwski
Replies:
Posted By: Powermyster
Date Posted: May 17, 2005 at 3:49 PM
go to the ignition switch and trace the starter wire see if its chopped anywhere for a starter kill.
has it got an alarm on it?
Posted By: brwski
Date Posted: May 17, 2005 at 4:06 PM
yes.
the biggest problem here is that the previous owners broke the remote and decided not to replace it (due to expense).
-------------
brwski
Posted By: hawn13
Date Posted: May 17, 2005 at 6:11 PM
try pulling the fuses in the alarm and disconnecting the brain it should be up under the steering column
Posted By: infbaffle
Date Posted: May 17, 2005 at 6:20 PM
before you go into all this disconnecting and unplugging,see if there is a valet button or switch. sometimes alarm manufacturers run the starter wire and/or other vehicle wires through the brain. if you find one, press the button, turn on the ignition and wait up to ten seconds. this works for most units.
-------------
infbaffle
|