pug 206 hdi alarm to window closure ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55923
Printed Date: June 07, 2024 at 9:06 AM

Topic: pug 206 hdi alarm to window closure ?

Posted By: rwballard
Subject: pug 206 hdi alarm to window closure ?
Date Posted: May 17, 2005 at 4:40 PM

Does any one know how to connect a window closure interface to a standard 2001 pug 206 HDI Alarm system?

The alarm has remote locking and ultrasonic sensors, a siren under the bonnet, and is built int the cars "BSI unit"

I need either a positive or negative feed when the alarm is armed

Thanks

Replies:

Posted By: Powermyster
Date Posted: May 17, 2005 at 4:50 PM

are you sure thats its a peugeot alarm and not 3rd party

Posted By: rwballard
Date Posted: May 17, 2005 at 4:54 PM

Yep, It has the original peugeot remote, and when I disconnected some wiring plugs from the "BSI unit" which is under the fuse box, the alarm no longer worked.

Posted By: rwballard
Date Posted: May 17, 2005 at 4:57 PM

In the Haynes manual it says that the BSI unit controls a number of things, including alarm, c/locking, interior light delay, so it has to be original.

It is made by Siemens though and not peugeot

Posted By: rwballard
Date Posted: May 18, 2005 at 12:35 PM

can any one help? where can i get a wiring diagram of the alarm system?

Print Page | Close Window