Print Page | Close Window

multiple LED hookup

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56075
Printed Date: March 29, 2024 at 2:49 AM


Topic: multiple LED hookup

Posted By: 704acc
Subject: multiple LED hookup
Date Posted: May 19, 2005 at 9:18 PM

I want to install multiple LEDs to my Viper alarm.  I have access to as many viper blue LEDs as I need.

1.  What is the proper way to wire multiple LEDs to the Viper alarm?

2.  How many can the Viper alarm drive?

3.  Will the brightness of the LEDs be affected?



-------------
Ray Kane



Replies:

Posted By: 704acc
Date Posted: May 19, 2005 at 10:57 PM

Daisy chain aka in series I presume



-------------
Ray Kane




Posted By: bigdaddy96
Date Posted: May 20, 2005 at 9:07 AM

that unit can handle 3 if they are the blue led's, 5 if they are red





Posted By: Powermyster
Date Posted: May 20, 2005 at 9:17 AM
i think two is enough. I have 1 on the drivers side and one on the way for the passanger side.

That'll do me fine




Posted By: vseth
Date Posted: May 20, 2005 at 9:33 AM

I've connected 8 blue varad LEDs ( independant from alarm ) in parallel. I've not hooked them up in the car as yet though. Any issues with such connections.






Print Page | Close Window