Print Page | Close Window

One Touch Power window diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56101
Printed Date: March 28, 2024 at 11:01 AM


Topic: One Touch Power window diagram

Posted By: gonethavorn
Subject: One Touch Power window diagram
Date Posted: May 20, 2005 at 11:25 AM

Help me out anybody!....Please let me know how to wire my window switch that controls my passenger side to be one touch down operation like my drivers window....Thanks.




Replies:

Posted By: Powermyster
Date Posted: May 20, 2005 at 11:48 AM
the likes of cliffors smart windows and some other window modules can make all your windows one touch   as standard its part of the switch its self. atleast thats what i always thought




Posted By: mito57
Date Posted: May 20, 2005 at 12:14 PM
I don't agree with that. You can install the module without an alarm.If you want you can use a pushbutton to give the module the ground pulse and activate it to roll the windows or just don't conect the activation wire and still use the one touch feature.




Posted By: wirewise
Date Posted: May 20, 2005 at 12:14 PM
bobk] wrote:

All window modules require a after market alarm install first, If none then factory switch is drivers window only.

Since when do "all" window modules require a after market alarm install first?

You can use almost anything to trigger a window module. Some will have different features, but not all require an alarm install first.

~wirewise~




Posted By: Pearl96Max
Date Posted: May 20, 2005 at 2:01 PM
Just wiring in a 530T would do the trick. The windows would still function one-touch up/down. Just no connection for ground when armed or activation.





Print Page | Close Window