2001 maxima key fob programming?
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56227
Printed Date: May 15, 2024 at 8:37 PM
Topic: 2001 maxima key fob programming?
Posted By: Krazzyborri
Subject: 2001 maxima key fob programming?
Date Posted: May 22, 2005 at 3:54 PM
Replies:
Posted By: KarTuneMan
Date Posted: May 23, 2005 at 11:00 AM
Posted By: cosmoworks
Date Posted: May 23, 2005 at 7:36 PM
^^ Actually NOT true... it can be done either with or without the Nissan Consult tool.
To program without Consult, do the following:
1) Close all doors
2) Insert key into and remove it from ignition key cylinder more than size times within 10 seconds. Hazard lights will flash twice. (Make sure to remove the key completely from the ignition each time and don't do the procedure too fast, otherwise the system will not enter the registration mode.)
3) Insert key into ignition key cylinder and turn to ACC position.
4) Push any button on the remote once. Hazard lights should flash twice.
5) Open driver side door.
Your welcome
To program without Consult, do the following:
1) Close all doors
2) Insert key into and remove it from ignition key cylinder more than size times within 10 seconds. Hazard lights will flash twice. (Make sure to remove the key completely from the ignition each time and don't do the procedure too fast, otherwise the system will not enter the registration mode.)
3) Insert key into ignition key cylinder and turn to ACC position.
4) Push any button on the remote once. Hazard lights should flash twice.
5) Open driver side door.
Your welcome
Posted By: KarTuneMan
Date Posted: May 23, 2005 at 7:44 PM
Posted By: domiyork
Date Posted: May 25, 2005 at 12:22 PM
Posted By: cosmoworks
Date Posted: May 26, 2005 at 7:30 PM