Valet 710T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56251
Printed Date: May 15, 2024 at 9:07 AM

Topic: Valet 710T

Posted By: darrelllh
Subject: Valet 710T
Date Posted: May 22, 2005 at 10:10 PM

Help. I inheritted a Valet 710T system and installed it exactly as it was in previous car. However I didn't get a valet switch. I have a momentary toggle switch with two wire leads, how do I connect it to the three pin connector on the 710T?

Darrell

Replies:

Posted By: darrelllh
Date Posted: May 22, 2005 at 10:11 PM

I for gpt to mention I need instructions on how to program the system once I connect the switch

Thanks

Posted By: swamprat323
Date Posted: May 23, 2005 at 8:36 PM

install guide

Posted By: darrelllh
Date Posted: May 23, 2005 at 10:31 PM

Thank you, I couldn't find this Doc.

Thanks

Print Page | Close Window