HT-455 Installation

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56406
Printed Date: July 20, 2025 at 5:43 PM

Topic: HT-455 Installation

Posted By: ipolito
Subject: HT-455 Installation
Date Posted: May 25, 2005 at 12:35 PM

Has anybody here figured out how to install an HT-455 alarm using all the features? The instructions are really bad. And I can't find help with this thing anywhere on the web.

Replies:

Posted By: DAZ7906
Date Posted: May 26, 2005 at 11:34 AM

What do you need help with?

Posted By: ipolito
Date Posted: May 26, 2005 at 3:12 PM

I need to know what they mean by open dormer. I don't know what Engine cap is. I don't know how to hook up the door switch wires. I also can't figure out where to place the main lights wire. Thank you.

Posted By: DAZ7906
Date Posted: May 26, 2005 at 11:02 PM

Engine cap is for the hood pin you don't have to hook it up. I don't know what open dormer is but I don't use it. As for the door switch wires your car is either (-) or (+) triggered use the one of off the alarm that matches the ones on your car.

What is your car's year, make, and model

Posted By: ipolito
Date Posted: May 27, 2005 at 6:35 PM

I have a 1986 Mazda B2000 and a 1995 Hyandi Accent. I got alarms for both vehicles.

Posted By: ukrevealed
Date Posted: June 15, 2005 at 10:58 AM

ipolito hello there the open dormer is for a mod interface which will turn the light on in the car when you disarm the alarm but you will have to buy this mod you can get them from clifford and they work fine.

Print Page | Close Window