I've done a search but i was unable to find anthing. Here is what i am trying to do.
I have a DEI Python 880XP alarm with windows module, prixomity sensor, and DEI's BB/Siren 515R. Well the 515R is placed in a location where it gets wet and shorts out and the siren goes off. I don't have any other location to put the siren.
I have a extra clifford siren that has a key on it. I am assuming it acts as a regular siren and a BB. It has 4 wires: red, blk, yellow, white with brown.
How do i hook up the clifford alarm to my DEI system? if i remember correctly i thought that the clifford system had a (-) negative trigger and the DEI's 515R has a (+) positive trigger.
Any help is appreciated.
Thx
the siren that shorts out is it pointing in the down posistion. waht kind of car is it. i never had any problem of finding a spot of a siren. i did on afew cars had to remove iteams to put in certin places.
is the siren still good or shorted out all the way. or do you want both sirens hook up togeher
swamprat323 wrote:
the siren that shorts out is it pointing in the down posistion. waht kind of car is it. i never had any problem of finding a spot of a siren. i did on afew cars had to remove iteams to put in certin places.
is the siren still good or shorted out all the way. or do you want both sirens hook up togeher
The car is a 2001 Honda S2000. I have the siren pointed down. The main problem is i lost the rubber cap and water gets in where the key is. Where can i get a new cap? Or wire up that other siren.
The clifford siren looks more heftier than the DEI one..
Here are a few pics... the siren is located on the passenger side right in front of the shock tower.
i forgot i even posted in this post. im not sure on the wiring the sirens but maybe you can use some sort sealent to cover up were water gets into it.