’05 dodge ram remote start ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56597
Printed Date: July 13, 2025 at 10:59 PM

Topic: ’05 dodge ram remote start ?

Posted By: lowvoltagetech
Subject: ’05 dodge ram remote start ?
Date Posted: May 28, 2005 at 8:52 PM

i have installed a viper 791xv and the remote start works. the problem i have is that the manual states to hook up the orange wire to the accessory which in the truck is pink / YELLOW & dk. Blue how are you able to connect one wire to multiple accerory wires? i found that the dk.blue is the blower and the 16ga is the ac. do i need to isolate these wire with a relay

any help would be great

-------------
lvt
lowvoltagetech.com

Replies:

Posted By: lowvoltagetech
Date Posted: May 28, 2005 at 9:02 PM

sorry , i forgot 1 thing

when the parking lights are hooked up and the accessory wire is hooked to the blower and the ac wires the ac cuts out with the flashing of the parking lights

-------------
lvt
lowvoltagetech.com

Posted By: SPIKECD40
Date Posted: May 29, 2005 at 12:18 AM

First off----

Did you isolate the parking light wire from the switch with a relay. Also you only have to hook up the ACC wire that powers the blowers..The only reason to hook up the other one is if you want the radio on,,

Posted By: KarTuneMan
Date Posted: May 29, 2005 at 10:25 PM

"break" your parking light wire with a relay, and use a 270ohm resistor

Purple / YELLOW wire cut it switch side to 87a, car side of the wire to 30. Ground to 87 and 86. in line with pin 87 put 270 ohms of resistance. Pos trigger from unit to pin 85.

Parking lights flash.

Your second accs. IS needed, use the smaller of the 3 wires that are the same color. If you do not power it up the ABS light might come on and stay on!!! Wire color is pink / YELLOW.

For wiring multiple acc. wires with one trigger, use two relays

-------------