Autowatch 345clam problems.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56603
Printed Date: July 06, 2025 at 11:03 AM

Topic: Autowatch 345clam problems.

Posted By: davidhor
Subject: Autowatch 345clam problems.
Date Posted: May 28, 2005 at 10:08 PM

Hey there, i have a Murano with Autowatch 345 installed. i seem to have problem with the lock/unlock part.

i wired the lock/unlock to the factory keyless signal's lock/unlock wire but then whenever i lock or unlock the door in the car "using the central locking switch" , it still disarm .. any ideas ? .

Replies:

Posted By: AUTOWATCH OZ
Date Posted: June 06, 2005 at 10:42 PM

If your car's indicators flash when you lock and unlock the car by remote you need to connect thesignal wire(brown) to the indicators.This means the alarm has to see the lock and unlock pulses as well as the indicator flash.Let me know how you go.

Print Page | Close Window