94 ford keyless entry installation

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56698
Printed Date: July 13, 2025 at 12:15 AM

Topic: 94 ford keyless entry installation

Posted By: wincheam
Subject: 94 ford keyless entry installation
Date Posted: May 30, 2005 at 7:29 PM

I am installing a valiant keyless entry system on a 94 Ford Bronco. On my relays i have connected (87a and 30) to the pink / YELLOW and pink/green wires. I have 87a going to the button in the door and 30 going to the actuator. I have 12v to (86 and 87), and the Green and Violet wires from the brain box hooked to 85. When I push the button on the remote, the brain box only clicks. I tried hooking some of the accessory wires (that I knew had power) up to the 85 spot on the relay and the door locks worked. Is there supposed to be power coming out of the green and violet wire when I push the remote button? Does anyone know what I've done wrong.

Replies:

Posted By: mo12v
Date Posted: May 30, 2005 at 10:41 PM

Be sure you have Negative Lock / Unlock output from Keyless Entry.........
Have you tried momentarily grounding PIN 85 to see if they work?
Make sure PINS 87a & 30 are NOT reversed.

Power Lock	PINK / YELLOW	PASSENGER KICK PANEL
Power Unlock	PINK/LIGHT GREEN	TEST FROM DRIVER SWITCH

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: wincheam
Date Posted: May 31, 2005 at 8:25 AM

I tried hooking a ground wire to the 85 pin and the locks worked. I also tested the lock trigger wires from the brain box with a multimeter. One wire is giving me a constant 4v the other does nothing and neither change when I hit the remote button. Do you think my brain box might be broken?