Installing a Python 660xp

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56700
Printed Date: July 06, 2025 at 5:07 PM

Topic: Installing a Python 660xp

Posted By: bigguy49
Subject: Installing a Python 660xp
Date Posted: May 30, 2005 at 7:51 PM

I am installing a DEI Python660xp in a Ford F250,diesel
I want to keep the existing factory remote lock/unlock module because all of the dome lights and are tied into this box.Is this possible if not how much rewiring will it take to just add the lock/unlock function?

-------------
Duty Honor Country

Replies:

Posted By: hagmanti
Date Posted: May 30, 2005 at 10:50 PM

bigguy49 wrote:

I am installing a DEI Python660xp in a Ford F250,diesel
I want to keep the existing factory remote lock/unlock module because all of the dome lights and are tied into this box.Is this possible if not how much rewiring will it take to just add the lock/unlock function?

What year?

Most alarms have the ability to (usually w/ an added relay) control your dome light, so that shouldn't be the only thing stopping you.

If you tie it into your factory system, then the odds are that it won't be nearly as secure as it should be.

Me

Posted By: bigguy49
Date Posted: May 31, 2005 at 6:10 PM

The truck is a 1997 F250 with factory keyless entry,
all I want is to keep the dome lights and the delay off
on the dome lights along with the ability to unlock both doors together or drivers only.It seems a shame that the circits are already there, just no way to access them with the add on alarm,without the addition of extra relays Mike

-------------
Duty Honor Country