Percision 200

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56823
Printed Date: May 13, 2025 at 12:25 AM

Topic: Percision 200

Posted By: Powermyster
Subject: Percision 200
Date Posted: June 01, 2005 at 4:13 PM

Got some scytek percision 200's in today. pretty cool system. spec wise. problem i have is on the back wiring diagram it gives the usuall blue and green locking wires as 500mA - outputs..

in the manual it says

Green: (-) 500mA lock output and (-)250mA unlock
Blue: (-) 500mA unlock output and (+) 250mA lock

do i have to diode isolate the Blue to only allow (-) or are they both negative or what way d they work

Replies:

Posted By: Powermyster
Date Posted: June 02, 2005 at 4:01 AM

anybody got any input on this for me. somebody said to just ignore it would that be right. Just treat them as both Negatives forget about the positive

Print Page | Close Window