Neatness

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56870
Printed Date: September 10, 2025 at 2:19 PM

Topic: Neatness

Posted By: perk
Subject: Neatness
Date Posted: June 02, 2005 at 1:04 AM

Hi: I'm trying to install a Command Start remote starter into a 91 Caprice. I would like to know how to do a neat job. I have wires running every which way. It looks like a plate of spagetti. How do the pros deal with this. Do their jobs look as messy as mine?

Martin.

Replies:

Posted By: Powermyster
Date Posted: June 02, 2005 at 3:50 AM

Tape everything up if your running 5 wires in the same direction tape them all together

buY a roll of insulating tape

Posted By: thepencil
Date Posted: June 02, 2005 at 12:28 PM

Martin,

I am sure you must have the unit install already. Now that you know how the wires are run and are more familar with it. I think installing it the second time will solve the mess.

Personnally I like to hide the alarm unit first. If you install everything than hide the unit which I think you did it gets quite messy. Again, it come down to experience and knowing your product. Try that and the advice of the above post it should remedy your problem.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: xtreme069
Date Posted: June 04, 2005 at 10:06 AM

also use zip ties to tie the alarm looms to the looms inside the car if you really want to be a neat freak tie the alarm looms to the backside of the car looms so you cant see them good to see your trying to do it properly

-------------
I Love This Industry!!