keyless entry - Pyle PWD103

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56919
Printed Date: July 13, 2025 at 6:11 PM

Topic: keyless entry - Pyle PWD103

Posted By: vzfox
Subject: keyless entry - Pyle PWD103
Date Posted: June 02, 2005 at 6:41 PM

I have purchased a Pyle - PWD103 keyless entry system for my 2005 GMC Safari. The book that came with Pyle for the wiring is quite confusing. I can located the wires I need on my vehicle, but cant figure out what to connect them to on the keyless entry. It came with one relay also. Can anyone help....maybe even show/tell me how to wire it up so my doors lock, horn honks and park lights flash?? Thanx.

Replies:

Posted By: KarTuneMan
Date Posted: June 02, 2005 at 8:50 PM

https://www.directechs.com/directwire/wire_body.asp?action=select&yr=5873&product=Keyless%20Entry

-------------

Posted By: vzfox
Date Posted: June 02, 2005 at 10:05 PM

the diagram in the manual is telling me to connect a wire to the positive (+) side of the horn. I have found the black (-) horn wire.

Posted By: mo12v
Date Posted: June 02, 2005 at 11:06 PM

Make sure you read the instructions......U may be able to change it thru programming or a jumper.....
Otherwise:

If the Unit has a POSITIVE Output for the Horn, then use a Relay to convert it to Negative..................:::

https://www.the12volt.com/relays/page1.asp

If you have a switch or an alarm or keyless entry that has a positive output that you wish to use to switch a device that requires a ground such as a horn, dome light, parking lights, head lights, hatch release, etc., wire a relay as shown below to convert the positive output (trigger) to a negative output.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.