05 jeep cherokee

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56932
Printed Date: May 11, 2025 at 10:58 PM

Topic: 05 jeep cherokee

Posted By: larkster
Subject: 05 jeep cherokee
Date Posted: June 02, 2005 at 10:17 PM

If the jeep is locked with the factory remote it arms the security system after it sets up the bcm goes asleep. I tried pulsing the ignition and the transponder bypass that doesnt work. It does however work with the key in the ignition so i fiqure you need a key sense wire. I did i quick check before i left work and the second starter, second accesory is also the keysense wire. My question is does anybody know what the keysense resistance is??

Replies:

Posted By: jcap
Date Posted: June 02, 2005 at 11:08 PM

what are you try to install. a remote starter ?

-------------
jcap

Posted By: KarTuneMan
Date Posted: June 02, 2005 at 11:23 PM

8.5k ohms

-------------

Posted By: larkster
Date Posted: June 03, 2005 at 9:33 PM

thanks kartuneman! turns out in order to unlock you need to pulse the second accesory relay. and double pulse unlock.

Print Page | Close Window