Python 881xp alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56935
Printed Date: May 05, 2024 at 8:08 AM

Topic: Python 881xp alarm/remote start

Posted By: offroadzj
Subject: Python 881xp alarm/remote start
Date Posted: June 03, 2005 at 12:08 AM

Hey. Whats up everyone. My name is Kenny, and Im a newbie to the site. Sounds like it might help me with some questions I may have. But first I do have a quick question about my alarm. I just bought the Python 881xp alarm/remstart, and I would like to hook up my driver side and passanger side windows to 2 of the 'accessory' options. Since they are a reverse polarity, I used 2 relays to get it to work (using this site as my diagram), but when I got it hooked up, it worked, but wouldnt allow my factory switch to work. Does anyone know of a way to wire the two relays so that both switches work (factory, and remote).

Thanks

Kenny

Replies:

Posted By: draasch
Date Posted: June 03, 2005 at 10:15 AM

recheck your hook up...you have it wirted wrong..

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: offroadzj
Date Posted: June 03, 2005 at 12:55 PM

draasch wrote:

recheck your hook up...you have it wirted wrong..

Will the DEI window automation things work with the reverse polarity windows w/out relays??? If so, i'll just get that part (makes things a lot easier)

THanks

Kenny