how to conect relays for keyless entry
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=56967
Printed Date: May 27, 2024 at 5:30 AM
Topic: how to conect relays for keyless entry
Posted By: cmorales
Subject: how to conect relays for keyless entry
Date Posted: June 03, 2005 at 11:35 AM
i want to put a keyless entry in the wife´s ford focus, currently it has a excalibur alarm and manual locks.
i want to lock/unlock when arm/disarm is pressed, olso it has to lock when car is started but doesnt has to unlock when the engine stops...
how can i connect the relays to do that?? what else do i need (circuit)?
thanks
(sorry if my english is not so good)
i want to lock/unlock when arm/disarm is pressed, olso it has to lock when car is started but doesnt has to unlock when the engine stops...
how can i connect the relays to do that?? what else do i need (circuit)?
thanks
(sorry if my english is not so good)
Replies:
Posted By: thepencil
Date Posted: June 03, 2005 at 12:14 PM
You need an ACTUATOR something like this.
The locking part when the car start. That's just a matter of programing the alarm unit to get that function. Check with your alarm unit owner's manual for the programing instruction.
And you need to wire it up like this to your alarm unit.
-------------
Be careful whose advice you buy, but be patient with those who supply it.
The locking part when the car start. That's just a matter of programing the alarm unit to get that function. Check with your alarm unit owner's manual for the programing instruction.
And you need to wire it up like this to your alarm unit.
-------------
Be careful whose advice you buy, but be patient with those who supply it.