New Anti-theft LED flashing lights
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57067
Printed Date: May 29, 2024 at 1:13 PM
Topic: New Anti-theft LED flashing lights
Posted By: bodybuilder
Subject: New Anti-theft LED flashing lights
Date Posted: June 04, 2005 at 11:00 PM
For those of you who've installed the new fancy anti-theft LED's, that are about 4.5 inches long and have about 6 LED lights that flicker in different patterns, if you could tell me which wire does what. I purchased one that came with no instructions. I'm assuming the black wire would be the ground. But I'm wondering what to do with the other 2 wires. I'm assuming one goes to the alarm and the other is a constant +12, or something like that. I know it's not rocket science, but I would like to avoid experimenting if I can. Thanks
-------------
Don't have a hero.
Look up to no one;
because if someone's leading the way, the best you'll ever be is second
Replies:
Posted By: bodybuilder
Date Posted: June 08, 2005 at 2:11 PM
Figured it out. Black is ground. Red is positive lead coming from positive LED output from alarm. Blue is +5v output for additional hookup of other LED's or factory LED.
-------------
Don't have a hero.
Look up to no one;
because if someone's leading the way, the best you'll ever be is second
|