93 civic power lock
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57076
Printed Date: July 07, 2025 at 4:47 PM
Topic: 93 civic power lock
Posted By: daniel_hill
Subject: 93 civic power lock
Date Posted: June 05, 2005 at 1:11 AM
i have a 93 civic 4 door, i also have an ungo ms7000, on the door lock and unlock harness of the alarm i have six wires, 3 for lock and 3 for unlock. i have an 87,87a, and a 30, i am assuming that is from the internal relay. i am trying to find out how to hook them up to my locks for keyless entry. thanks in advance
Replies:
Posted By: auex
Date Posted: June 05, 2005 at 1:26 AM
30s to ground, 87s output to locks, and 87As are not used. This is assuming you are hooking them up to factory locks and not aftermarket.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: KarTuneMan
Date Posted: June 05, 2005 at 1:54 AM
REMEMBER........87 and 30 can be "reversed"......as well as 85, and 86..!
-------------
Posted By: daniel_hill
Date Posted: June 05, 2005 at 9:36 AM
do ground the 30 to the car or put it on the negativeside of the lock. and fot he 87 i hook that to the corresponding lock or unlock positive wire. just trying to get all the info before irip intoit. thanks
|