switch and motor
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57082
Printed Date: June 10, 2024 at 6:07 AM
Topic: switch and motor
Posted By: swhite005
Subject: switch and motor
Date Posted: June 05, 2005 at 2:50 AM
on the 5 wire door lock system, the diagram shows the lock and unlock wires cut to connect to the relay. one side is from the switch and the other is from the motor. just so I don't mix them up, is the wire from the switch the wire coming out of the lock button on the door and the wire from the motor is coming from under the dash? or vice-a-versa? thanks
Replies:
Posted By: mo12v
Date Posted: June 05, 2005 at 8:40 AM
Depending on where U cut the wires:
You would normally test your cut wires by pressing the driver switch ( Switch side ) & the other side is Motor side.
Note:
Some vehicles require you to check from Passenger switch. If you don't then the Relay will be wired backwards.
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
|