94 j30 infiniti remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57096
Printed Date: May 09, 2024 at 8:59 AM

Topic: 94 j30 infiniti remote start

Posted By: ksutton
Subject: 94 j30 infiniti remote start
Date Posted: June 05, 2005 at 11:23 AM

doing a 94 j30 remote start using scytek remote start and dei tec info

I got eveything powered up that its says on the paper but when i try to crank it just ingage the starter until i turn the key on

I checked for other wires that may need to be powered up no luck.

Replies:

Posted By: metaverse
Date Posted: June 05, 2005 at 2:38 PM

I did my 93 J30 last year

Two ignition wires to be powered on Ign1 WHITE/ black and Ign2 BLACK/ red.

Did you check the scytek to make sure all outputs are working ? It could be a program only option. Recheck your wiring connections. If you have a starter disable relay installed, check that.. Everything should be pretty forward. Tight car to work on, but, not impossible..

Print Page | Close Window