Print Page | Close Window

2001 dodge dakota

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57100
Printed Date: May 16, 2024 at 10:49 AM


Topic: 2001 dodge dakota

Posted By: accord78
Subject: 2001 dodge dakota
Date Posted: June 05, 2005 at 12:20 PM

sup guys need alittle help. i'm about to install a basic alarm system in this truck i need to know where and how to isolate the door trigger wires since i have to use both of then. next question how to hook up the domelight supervision. thanks



Replies:

Posted By: dare_ds69
Date Posted: June 06, 2005 at 7:58 PM

you need to do this

https://directechs.com/techtips/pdfs/resources/security/directed_techtips/1076.pdf

Door Trigger    -  CTM
Notes: The driver door trigger is tan in connector 2, pin 15. The passenger door trigger (and rears on the 4dr) is tan/red in connector 2, pin 13. Use both and diode isolate each. See directfax document #1076 for wiring information.

The Central Timer Module is in the driver kick panel.
Dome Supervision use door trigger    

use a relay

30 goes to green wire door triger

87 ground

85 BLACK/ white

8612v fusedposted_image



-------------
how own your mind, control your life.
MECP certified. always use a DMM





Print Page | Close Window