Anyone done one of these yet? I know the wiring is similar to the new maximas but, what do you do about the immobilizer/key fob?
use the valet key and 556u it works.
-------------
how own your mind, control your life.
MECP certified. always use a DMM
Will the push button start work with the valet key in the car?
I wouldn't want to have someone break in and just step on the brake and push the button, due to the valet.
Thanks.
BY the way the valet key will not work ! It is good to open the door glove box and trunk only
I did this one today.
Dismount the key fob, open the part with the key lock (plastic snap) too you will have 3 plastic pieces total. Inside the third plastic piece you will find a philips transponder. Use this one next to the key port with a regular key box. Re assemble the remote and give it back to the customer.Do not try to leave it in the car cause you wont be able to lock the car anymore.
Then you may use the start wire on the brake pedal(pink/ blue for brake light) Brake wire from remote starter will go on the pink/blue wire that is not actuating the brake ligh , the brown yellow as ignition (behind key port) and negative pulse(converted from start wire on the BROWN / white wire at the push button.
To allow the customer to go with the car without re-starting i set up a latching on the ignition (brown yellow) behind keyport activated by the unlock button on the starter remote. The unlatch will be done caus one side both of my relay for latch are feed with the white wire (true ignition) from the driver kick panel fuse box.
Anyway I think I told you enough to put you on the track