SPAL door lock switches

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57211
Printed Date: May 15, 2025 at 5:34 AM

Topic: SPAL door lock switches

Posted By: dannyboi
Subject: SPAL door lock switches
Date Posted: June 07, 2005 at 2:48 AM

Yea im posting this because i needed help on installing the switch that locks and unlocks my doors, my friend had installed the locks and it works great, jus tthe switch i am having problems with, there was suppose to be an attachable where i can attach the wires from the switch to the main harness, but i can't, the switch has a blue black and red wire coming out from it, I don't know if you guys konw what i am talkin about, but if you do, help me put the wires to the main harness. thanks...

-------------
"the greatest skill of a person is a skill unknown"

Replies:

Posted By: Powermyster
Date Posted: June 07, 2005 at 3:52 AM

don't suppose that you have a diagram for that model..

have you got the switch. What switch are you using.( just for my own curiosity)

Its a handy enough job if its negative switch which i think it is. you just need to ground the lock and unlock wires through the switch.

Some body on here should be able to tell you the wire colours for that model Kit

Posted By: diabloscope
Date Posted: June 09, 2005 at 3:07 AM

If your are using spal switches / five wired blue/ green on the outsides , black on the next two on the inside and red in the middle just like the ones used for Spal power window Kits / . you just might be able to do without relays red 12 , blacks ground , Blue & green are used for lock & unlock Good Luck !!