Print Page | Close Window

Solid LED on 791XV?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57311
Printed Date: April 29, 2024 at 9:38 PM


Topic: Solid LED on 791XV?

Posted By: CorNut
Subject: Solid LED on 791XV?
Date Posted: June 08, 2005 at 4:49 PM

I am sorry if this isn't where this thread goes.. This is my first post here. I took my car to an autobody shop and my car ended up getting stripped... 18"s got stollen and everything else of value except my alarm.. It was the guys at the shop that did it... they just went bankrupt and left my car stranded and won't give me a dime.. I'm working with the courts on that but that's another issue...

My reason for posting here is because my alarm isn't working now that I got my car back.. The remote works fine, it locks, unlocks, and even starts my car however the alarm itself is not turning on. The LED is just a solid blue, no chirps or anything and you can stick your arm through the window(proximity sensor) or hit the car as hard as you want and not even a sound... I have my car back on the road again but I'm afraid to put my new audio/video equipment in there until I get the alarm fixed.. I searched the forum for "solid light LED" and tried reading the owners manual online but it just confused me.. all I could find is functions with the remote, replacing the batter and other stupid stuff.. Thanks for any help guys/gals.

-Cory



Replies:

Posted By: chungo
Date Posted: June 08, 2005 at 5:21 PM

the alarm might be in valet mode, try opening  one door and then pressing lock/ulock/lock on your remote.




Posted By: CorNut
Date Posted: June 08, 2005 at 6:34 PM
dude, u r the man, thanks a lot.. it's fixed


Print Page | Close Window