dome light1

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57398
Printed Date: May 28, 2024 at 3:01 PM

Topic: dome light1

Posted By: HICKMANAE3
Subject: dome light1
Date Posted: June 09, 2005 at 9:38 PM

i am tryin to install that new galaxy color screen lcd alarm into my car and the problem i ran into the other night was my dome light will not cut off with or without the alarm disconnect. and igintion turned on or off. i have an 97 explorer and what i notice so far was if i cut the door tigger wire (black and light blue). my back two dome lights cuts off perfect after i start and turn off the ignition. but not the front dome light. the front dome light stays on no matter if the ignition is on or off and if the alarm is hook up or not. so how can i get all three dome lights to work properly. and what is the main dome light wire that ccontrols all three doem lights.

Replies:

Posted By: mo12v
Date Posted: June 09, 2005 at 11:02 PM

R U sure someone didn't turn the Front dome light ON??
Unless you have changed the wires, they should be interconnected.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: HICKMANAE3
Date Posted: June 10, 2005 at 1:51 AM

yes im sure i have not turned the dome light on . But other then that where can i find the wire that driectly controls the dome light besides the door trigger wire

-------------
No security system can beat the tow truck :(

Posted By: Powermyster
Date Posted: June 10, 2005 at 5:40 AM

try the wire at the dome light switch see if that still gives the same problem.