Print Page | Close Window

look at this remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57419
Printed Date: May 14, 2025 at 7:35 AM


Topic: look at this remote start

Posted By: soundmasta
Subject: look at this remote start
Date Posted: June 10, 2005 at 7:41 AM

does your remote start install look like this? a customer with a chevy truck that had a remote start installed by another local shop came in with problems like, well, it didn't work. can't figure out why...

https://i2.photobucket.com/albums/y28/jeremykowatch/Picture3003.jpg

https://i2.photobucket.com/albums/y28/jeremykowatch/totalaudio.jpg




Replies:

Posted By: j68rh
Date Posted: June 10, 2005 at 8:08 AM
That is bad.  did you send that individual back to the shop that installed it or did your shop fix the problem for more business?



Posted By: turtleturtle
Date Posted: June 10, 2005 at 8:14 AM

I would tell him to go back to the shop, get his money back, and you fix it for him, and get some cash for it also.

That is so ugly.  They did a horrible job.  Looks like a monkey was trying to make a nest or something!



-------------
"...am I not Turtley enough for the Turtle Club?"



Posted By: KarTuneMan
Date Posted: June 10, 2005 at 8:37 AM
shame, shame, shame............WoW

-------------



Posted By: soundmasta
Date Posted: June 10, 2005 at 9:23 AM
thats not even the worst one i've seen come out of that shop. i completely uninstalled and reinstalled the starter.



Posted By: Powermyster
Date Posted: June 10, 2005 at 4:40 PM
LOL Looks worse than my first ever install   and that was messy



Posted By: jrilla
Date Posted: June 10, 2005 at 5:07 PM
The problem is no doubt the fact that they used scotchloks to make their connections. I would re-install and solder the connections.

-------------
J Rilla

Owner/Installer



Posted By: Powermyster
Date Posted: June 10, 2005 at 5:11 PM
The problem is the Installer. he should be brought to a proper shop and shows how to make things neat




Print Page | Close Window