Print Page | Close Window

Remstart on 05 Trailblazers

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57462
Printed Date: April 29, 2024 at 12:27 PM


Topic: Remstart on 05 Trailblazers

Posted By: offroadzj
Subject: Remstart on 05 Trailblazers
Date Posted: June 10, 2005 at 9:02 PM

Does anyone know why the new 05 trailblazers dont seem to "get along" with aftermarket remote starts? I work at circuit city, and we have done a few, and they all come back with problems. I would love to be able to come up with a solution (if one exists) so we dont have to turn customers away.

Thanks

kenny




Replies:

Posted By: Autoobsession
Date Posted: June 11, 2005 at 12:53 AM

Ive done dozens of them and not have had one come back yet.

Whats the problem?



-------------




Posted By: offroadzj
Date Posted: June 11, 2005 at 1:46 AM

to be honest, im not 100% sure. I havent done any myself, I just know that everytime a customer comes in, we can never do it, and I thought it would be nice if we didnt have to turn them away. From what I've heard, something with the factory alarm, or computer, or something doesnt accept the remote start.... i dunno. Is there anything special that you do to them that you dont normally do on most other vehicles?

Thanks

Kenny





Posted By: EL_NOVATO
Date Posted: June 11, 2005 at 7:43 AM

Are you using a passlock module to bypass the factory security system?  I just had a RS system installed in a '02 Trailblazer.  I had to buy a module that would bypass the Passlock system in order for them to be able to do RS.

HTH

e.n. posted_image





Posted By: EL_NOVATO
Date Posted: June 11, 2005 at 8:03 AM

https://www.drdetailshop.com/457G.htm <----that's the one I purchased for my trailblazer except I didn't pay that much.  Notice that it also has the Door lock module built in.  I'm not exactly sure why, but it needs the door lock module in order to do keyless entry.

HTH

e.n. posted_image





Posted By: kgerry
Date Posted: June 11, 2005 at 12:18 PM
it needs the module because the doorlocks on these vehicles operate on the class II data bus.....   i have done many 02-up Envoys, Trailblazers, etc with no real issues as well.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: NowYaKnow
Date Posted: June 11, 2005 at 3:44 PM
We've done a bunch of them (2005's) with no issues so far. Again if you can get us some more info as to what problems your having we may be able to give some better tips. We normally do NOT energize the brown acc wire, but that shouldn't make a difference in this vehicle.

Mike




Posted By: Uniqueauto
Date Posted: June 11, 2005 at 10:31 PM
I think its the interface equipment you guys are using.... DEI all the way!

-------------
Installer/Owner

Double check twice Install once!
Wires are my Best Friends





Print Page | Close Window