dei 457gw

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57471
Printed Date: May 10, 2025 at 6:13 PM

Topic: dei 457gw

Posted By: slammed97nismo
Subject: dei 457gw
Date Posted: June 11, 2005 at 9:16 AM

has anyone had any problems with the new dei 457gw all in one module for gm we used it on a o5 silverado and the door locks work for a little while and then stop lockin...any help would be greatly appreciated.....

Replies:

Posted By: christophe
Date Posted: June 11, 2005 at 10:34 AM

I had one act up once, what worked for me was to use the power and ground conn. at the data bus plug(orange and black) to power my 457g. hope this helps. since I hook them all up like this I've never had an issue

Posted By: slammed97nismo
Date Posted: June 12, 2005 at 9:21 AM

ok well we found out that dei skrewed up on the design and they shipped out to shipments before figurin it out....on the 457g u have diod the ground and the door locks will work fine....

Posted By: EL_NOVATO
Date Posted: June 12, 2005 at 12:11 PM

slammed...

do you mean that you need a diode on the ground and it will work fine?

e.n. :)

Posted By: dare_ds69
Date Posted: June 13, 2005 at 6:25 AM

yes

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Print Page | Close Window