05 Canyon 555L and 551R/S Question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57473
Printed Date: May 15, 2024 at 4:08 PM

Topic: 05 Canyon 555L and 551R/S Question

Posted By: paulper
Subject: 05 Canyon 555L and 551R/S Question
Date Posted: June 11, 2005 at 10:15 AM

Hello,

I am reinstalling a 551R Valet remote start into my 05 Canyon, I am using the 555L to interface the passlock system.

I have a question concerning hookup of the 555L, I was given document 1610 to use as a guide to install the 555L and am being told its the same as the Ion.

My question is 1610 shows the black lead from the 555L being grounded, I believe this is a typo shouldn't this wire be connected to the WHITE/ blck reference wire in the ign switch harness?

Is there someone familiar with this application that could help me answer this question?

Paul

-------------
Paul P.

Replies:

Posted By: christophe
Date Posted: June 11, 2005 at 10:28 AM

yes, ground the black wire to solid metal in the kick panel, not under the dash

Posted By: kgerry
Date Posted: June 11, 2005 at 12:16 PM

i would use a PLXR on that vehicle for bypass.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: paulper
Date Posted: June 11, 2005 at 6:57 PM

The PLXR is made by which company? I saw a plxr from code alarm and another from a comapny in M.I. auto alalrm pro. Which on is it i need to get?

Thanks,

Paul

-------------
Paul P.