programming compustar remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57509
Printed Date: May 14, 2024 at 8:09 AM

Topic: programming compustar remote

Posted By: hedfly
Subject: programming compustar remote
Date Posted: June 11, 2005 at 10:52 PM

for some reason i cant get my second remote on my compustar alarm to program. i'm doing everything it says...

remove battery from remote
turn ignition on and off 5 times and wait for confirmation
stick in battery

then it should confirm the remote and everything should work... but it's not.

-------------
-'02 Mustang GT-
-Pioneer AVIC-N1
-Memphis 16-MCH1300 5 Channel Amp
-Memphis MClass 6-1/2" Component Speakers
-Memphis M3 12" Sub
-Xbox

Replies:

Posted By: hawn13
Date Posted: June 12, 2005 at 12:42 AM

try pressing the 1 button after you stick the battery in sometimes they are a little picky.

Posted By: hedfly
Date Posted: June 12, 2005 at 11:48 AM

i tried pushing buttons after i installed the battery and the blue light blinks but the alarm doesnt detect it or anything.

it doesnt have a 1 button though cause it's the cheesy extra one that comes with it, without the LCD display.
the one with the LCD display programmed fine.

-------------
-'02 Mustang GT-
-Pioneer AVIC-N1
-Memphis 16-MCH1300 5 Channel Amp
-Memphis MClass 6-1/2" Component Speakers
-Memphis M3 12" Sub
-Xbox

Posted By: Montrealler
Date Posted: June 12, 2005 at 10:17 PM

Ignition on five times in a window of 5 seconds.

Then hit the arm or lock button of each remote you want to learn. Must program all remote at the same time.

Print Page | Close Window