Print Page | Close Window

Adding switch for keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57534
Printed Date: May 13, 2024 at 5:07 PM


Topic: Adding switch for keyless entry

Posted By: stagger
Subject: Adding switch for keyless entry
Date Posted: June 12, 2005 at 12:06 PM

Hi, i have a 2000 Chevy S-10 PU truck.  I want to add keyless entry to the truck.  I have the Directed 451M relay to trigger the add on actuators in the doors.

I have an autopage 855 alarm.

My Question: Can I add a momentary rocker switch in the car to lock and unlock the doors without using the Alarm remote???

in other words, when i get in and I want to lock the doors, i could hit the switch and the doors would lock, without hitting the keypad and having the alarm system arm and lock the doors?

If so, can I just wire the switch in parrell with a hot in the center contact, and a feed coming off both sides to tie into the relay for the lock and unlock?




Replies:

Posted By: Montrealler
Date Posted: June 12, 2005 at 10:14 PM
For sure you can do this.

You got it the way your are explaining is very clear.





Print Page | Close Window