mgzr central locking

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57563
Printed Date: July 04, 2025 at 9:24 PM

Topic: mgzr central locking

Posted By: marksmart
Subject: mgzr central locking
Date Posted: June 12, 2005 at 7:05 PM

i'm fitting a clifford arrow 3 to a MGZR 04 plate, but the central locking will not engage through the alarm. i've tried tracing the cables to the locking box and alarm ECU without success.

any suggestions welcome

-------------
Mark Smart

Replies:

Posted By: Powermyster
Date Posted: June 13, 2005 at 3:41 AM

have you tested the wires to see what kind of locking system it is.

also have you tested the outputs on the alarm

Posted By: dare_ds69
Date Posted: June 13, 2005 at 5:47 AM

try to find the motor wires and use relay to do it.

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Posted By: marksmart
Date Posted: June 13, 2005 at 12:07 PM

when you lock the doors, there are two wires that pulse, one's lock and the other is dead lock. if i find the feed to the locking at the relay could i wire the alarm directly to that and use the factory relay to do the rest?

-------------
Mark Smart

Print Page | Close Window