oldsmobile keyless entry program

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57611
Printed Date: July 04, 2025 at 5:19 PM

Topic: oldsmobile keyless entry program

Posted By: tonya1961
Subject: oldsmobile keyless entry program
Date Posted: June 13, 2005 at 1:32 PM

Can anyone help me with programming my keyless entry for a 98 Oldsmobile Alero? I have two remotes and both need to be programed. Thanks in advance for your help.:)

-------------
thanks, tt

Replies:

Posted By: thepencil
Date Posted: June 14, 2005 at 9:59 AM

What brand of remote is it?

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: danieljaluise
Date Posted: June 14, 2005 at 11:18 AM

there is a wire behind the carpet by the radio antenna in the trunk. It should have a little plastic connector on it. you need to ground that wire, which should cause the locks to "cycle"....keep the wire grounded then push the buttons on the key fob.....unground wire....

the above should work....never pay the dealer for something that easy...

Posted By: danieljaluise
Date Posted: June 14, 2005 at 11:34 AM

Posted By: tonya1961
Date Posted: June 14, 2005 at 11:35 AM

The remote is the one that came with the car, the identification numbers on the remote are as follows:

GM/UTA 25678792

FCC ID: KOBUT1BT

-------------
thanks, tt

Posted By: tonya1961
Date Posted: June 15, 2005 at 1:11 PM

I'm feeling real stupid because my car is a 99 Oldsmobile Alero not a 98 like I had mistyped in the original message. Can anyone tell me how to program my keyless entry?

Thanks

-------------
thanks, tt

Print Page | Close Window