can anyone give me the wiring for 1999 opel corsa or vauxhall corsa please i can only find 1994
MAKE OPEL MOD. CORSA YEAR 99 ® PETROL
DIESEL
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment, on the
support of the driver’s side shock absorber. To pass the cables use the original
rubber sleeve located near the support of the driver’s side shock absorber.
CENTRAL UNIT POSITION Position the modular systems and the modules under the left side of the
dashboard, driver’s side.
POWER SUPPLY + 30: connect to the general power supply of the fuse box.
- 31: connect with a cable terminal directly to the car body.
IGNITION WIRE + 15/54: connect to the BLACK wire located in the wiring harness behind the sill
cover, driver’s side.
DIRECTION INDICATORS Connect to the BLACK/ WHITE and BLACK/ GREEN wires located in the wiring
harness behind the driver’s side sill cover.
CENTRAL DOORS LOCKING Negative control signal
Connect to the BROWN / WHITE wire (unlock) and to the BROWN / RED wire (lock)
located in the wiring harness behind the driver’s side sill cover.
IMMOBILISATION POINT Fuel pump
Cut the 2,5 mm2 RED / BLUE wire located in the wiring harness behind the driver’s
side sill cover.
STARTER +50: Cut the BLACK / YELLOW wire located in the wiring harness coming out of
the connector of the ignition key.
BONNET SWITCH Install an additional switch on the headlamp support plate.
DOORS SWITCH Connect to the LIGHT GREY wire located in the wiring harness behind the driver’s
side sill cover.
BOOT SWITCH Connect to the BROWN / WHITE wire coming out of the connector of the boot
lamp.