Print Page | Close Window

Commando FM Combo 5000, 03 Dodge Ram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5771
Printed Date: July 05, 2025 at 12:07 AM


Topic: Commando FM Combo 5000, 03 Dodge Ram

Posted By: rwl6935
Subject: Commando FM Combo 5000, 03 Dodge Ram
Date Posted: November 22, 2002 at 12:22 PM

Hi,

I'm hooking up my alarm system tomorrow (Commando FMcombo 5000)  in an '03 dodge ram quad cab and have a question. To eliminat hooking up seperate relays for door lock/unlock and dome supervision, is it possible to just tap into the existing door lock/unlock and dome supervision  (non alarm) factory circuit? Is there any way to simplify this as opposed to having relays all over the place? I drew the whole instalation up on a piece of paper and this darn thing looks like a techs worst nightmare! If have to do this install per the instructions I'll be using 1 DLR and 4 SPDT relays.

Any ideas are welcome,

Bob




Replies:

Posted By: securinu
Date Posted: November 22, 2002 at 1:31 PM
you will need to use the relays to ensure a good connaection to all circuits . this will ensure trouble free use for your customer.



Posted By: rwl6935
Date Posted: November 22, 2002 at 2:47 PM

I am the customer <LOL>

Your right, may take alittle more time...mite as well do it right the first time-

Thanks, bob



-------------
"Keep it simple stupid!"


Print Page | Close Window