04 Colorado problems, alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57716
Printed Date: November 04, 2025 at 10:06 AM
Topic: 04 Colorado problems, alarm
Posted By: shesaidshewas18
Subject: 04 Colorado problems, alarm
Date Posted: June 14, 2005 at 11:32 PM
I dont remember what model Clifford alarm I just installed into it, but now the car wont start. Owner said that the ignition isnt getting 12v. Now, when I first finished installing, everything was working just fine. Owner goes around checking if I got the door triggers right and so on. All of a sudden the parking lights stopped working if you arm/dis-arm or when the horn goes off. I used the WHITE/ green wire, and put pin 30 keyside ignition, and tapped into that wire comming out of pin 30 is pin 86. Then going into pin 86 I got the ignition wire FROM the alarm going into that. Pin 85 is connected to the ground when armed wire from the alarm. This somewhat happened to me before, but I just dis-connected the (-) term off the battery for a little while and it fixed it. We disconnected the (+) side this time and it didnt work. Any suggestions?
Replies:
Posted By: mo12v
Date Posted: June 15, 2005 at 9:28 AM
What happened to PIN 87 & 87a??
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
|